Scientific evidence now confirms, road vibration and related body motion on vehicle seats generate micro-electrical charges on the body.
2 Auto Seat Pads
2 Coil Cords
1 Earthing Book
approximately 9″ x 9″
Directions for use and care How to set up your Auto Seat pad
1.Thread the connecting cord through the opening between the back and bottom of your car seat. Place the auto seat pad on the Seat and attach the snap connector to the pad (both sides of the auto seat pad are conductive)
2. Then route the connecting cord under the car seat to a point where the earthing clip can be attached directly to any metal portion of the seat frame.
3. To get a good connection, insure that the metal surface is clean and free of grease or paint. Because all cars are designed differently, installation may vary.
4. For your safety, make sure the connecting cord does not interfere with the operation of the vehicle.
How to care for your Earthing auto seat pad
To clean, simply wipe down the pad using a non corrosive cleaner.
All information above from Earthing.com